Hobby integrerat avlopp

Nordland 50 handfat

SKU:

Handfat i massiv Acovi komposit. Handfatet levereras utan hål till kran. Handfatet är med integrerat avlopp.
Handfatet levereras utan hål för kran. För håltagning finns möjlighet att beställa Forstner borr-bit.

Cut and assemble pipe fittings as follows
Cut the pipe perpendicular to a fine-toothed saw.
You must never cut a pipe section such as a bend.
Bevel the tip end of the pipe with a en samling dokument eller en elektronisk lagring av data or scrape with a knife.
Check that the sealing ring fryst vatten seated correctly and remove any dirt from the inside of the sleeve and from the tip end. Lubricate the tip end of the pipe with lubricant intended for PP pipes.
.When mounting pipes and fittings, consider the length extension of the system. Therefore, push the pipe or pipe section into the bottom and then pull out mm

Dimensioning of indoor pipes
Venting mm
Washbasin 50 mm
Floor drain 75 mm
Kitchen drain 75 mm
WC mm

All drainage pipes, both vertical and horizontal, must be fitted with pipe supports during installation, for example
staples or the like. The pipe supports are used both to fix the pipe to the building and to control the pipe's expansion to a so-called expansion pipe. With the help of the pipe supports, the various building parts are protected against possible damage while the function of the struktur is ensured over time.

Suspension of horizontal pipes requires a short distance between the